TP04310A ThermoStream®

Thermal Inducing System

Quickly and conveniently bring small and large devices, modules, PCBs, and other assemblies to precise temperature at the tester or application site.

Temperature Range*: -80° to +225°C

System Performance:

• Airflow: High capacity (9 l/s (18 scfm)) continuous airflow optimizes temperature transition rate and throughput.
• Temperature Control: Air or Patented DUT Dual Loop directly at the DUT case to ±0.1°C
• Typical Temperature transition rate:
-55° to +125°C: approximately 7 seconds**
+125° to -55°C: approximately 13 seconds**
• DUT Sensor Ports: Type T or Type K thermocouple
• Temperature set, display and resolution: ±0.1°C
• Temperature Accuracy: 1.0°C ( calibrated to NIST standard)

Remote interface ports: Three: IEEE-488, RS232C, SOT/EOT/SFF

* Due to Temptronic's use of HCFC-free refrigerants with 50 Hz, TP04310 systems, the ultimate low temperature capacity of these systems will be approximately 5°C warmer than 60 Hz systems.

** Transition rate measured at 18 scfm, cycling from -80° to +225°C

Operating Features:

• User Control from the front panel function keys and intuitive menus or via remote interface ( IEEE-488, RS232, ST/EOT)

• Two modes of operation:
Operator Mode: Test and cycle at Hot/Ambient/Cold temperatures
Cycling Mode: Utilize up to 12 thermal cycling sequences, "Smart Tuning" and other advanced features.

• User-defined "At Temperature" Windows, airflow rate, Air or DUT Temperature Control

• Thermal head raising and lowering: Pneumatic control; also manually adjustable

• Thermal Cycling Sequences: Set up to 12 cycling routines in sequence on one table.

• Save up to 12 test set-up files for quick recall and test repeatability.

• Quick airflow control from Front panel

• CFC-free for all systems; HCFC-free for all 50 Hz Systems

• CE approved; and SEMI S2-93A compliant

Worldwide Service and Support

Click Here to Request More Information

Click Here to Download Specifications and Data Sheets